Process

At Kleen & Fresh Company we use a 3 step process to clean your wall to wall carpeting

1

We inspect all carpeted areas with the customer to see the condition the carpets are in and what areas will need special attention. This allows us to formulate the right solution for each job.

2

Detergent. We spray an environmentally friendly biodegradable enzyme detergent across all the carpeting. The detergent we use is made with natural enzymes that are safe for your family and pets.

3

Scrubbing. Our power scrubber with counter-rotating brushes lifts the pile and loosens the soil from the fiber. The scrubber picks up any loose lint or hair. This step is used only on the carpets that have soil severely ground in. Furniture is agitated using a hand brush and again on furniture that has been severely soiled. nt.

4

Final Rinse: We use our custom weighted drag tool to rinse and extract the soil and detergent back into our truck, leaving your carpets looking as new as possible. The drag tool works at between 600 and 1000 psi (depending on what the carpet calls for) of 215-degree hot water to help emulsify oily stains and to help sanitize your carpets. With our 30 horse power vacuum we can have drying times between 2 and 4 hours because we can remove 95% to 98% of the moisture in the carpets. Drying times may vary depending on the environmental conditions.*

*May take longer to dry if there is higher humidity present*

5

Furniture is cleaned in the same respect as the carpet but at a much gentler application of the process. Hand brushing is used for the agitation and an upholstery tool is used to extract the soil and detergent from the fiber. Delicate fibers are dry cleaned with an environmentally safe solution. This is applied with a hand bonnet.

*May take longer to dry if higher humidity is present*

A white ceramic bowl filled with a vibrant, green-tinted creamy soup, garnished with a sprinkle of fresh green herbs.
Aladdin's Wool Rug Cleaning Process

We combine old-world craftsmanship with today’s technological advances

  1. Each Rug is thoroughly inspected for the type and needs of the rug. Depending on the age, type and condition of the rug, this will dictate the cleaning it will be given. We can either dry-clean or wet-clean your rug.
  2. Wet cleaning includes prespraying of the rug and treating areas that need specific attention due to heavy soiling. Pet problems are treated with antibacterials to kill germs.
  3. The rug is hot- or cold-water extracted to deep clean and remove all soil and treatments from the fiber.
  4. The fringe is hand brushed and cleaned using an upholstery tool to individually clean each strand of the fringe.
  5. If your rug requires dry cleaning, we can do this by hand or machine using an environmentally friendly solution.


PROCESS

Tile and Grout Cleaning Process

  1. We wash your floors using a triple-wash, three-step process including a high-pH clean, acid cleaning, and a neutral wash. Priced by the sq ft.
  2. High-pressure hot water from our exclusive Kleen and Fresh truck-powered machine is then used to spray the floor and picked up with a vacuum tool.
  3. After cleaning, we use multiple high-volume drying fans to get your floor as dry as possible, as quickly as possible.
  4. Grout sealer is applied with an application tool.
A group of diverse children sitting on a rug and raising their hands in a brightly lit, colorful classroom.
Window Cleaning
  1. Windows are examined to see what condition they are in and if window scrapers can be used.
  2. If window screens are relevant, they are removed for easier access to the window.
  3. Soft mops apply cleaning solution to windows
  4. Windows are scraped only if they require it so no damage can be done to the window.
  5. Soft mop is reapplied with cleaning solution and removed with a rubber squeegee.
  6. All customers get new scraping and rubber blades on each job.
  7. All sills are wiped down inside and out and screens are cleaned if they are made available.
  8. Screens are replaced.

PROCESS

Power Washing

  1. The house is inspected to check to see what must be done to satisfy your needs.
  2. A natural bleach spray is sprayed on the house to kill any mold or mildew and remove dirt.
  3. The house is then sprayed with our power washers (up to 4200 psi) to remove any and all obstructions from the house.
  4. The house is left alone to air dry
  5. The same process is used on decks and walkways but for any power washing on the ground we use a high-pressure rotary spinner so the floor is cleaned correctly and precisely.
A group of diverse children sitting on a rug and raising their hands in a brightly lit, colorful classroom.
Wood, Pergo and Congoleum Floor Cleaning
  1. Floors are pre-vacuumed. All edges are taped to protect baseboard and kick plates.
  2. We use a minute man machine that applies a specialized no-rinse detergent to the floor which is agitated and extracted back into the machine.
  3. Once dried, a satin or gloss finish can be applied to the flooring.
  4. Power dryers dry the floors within 30 minutes. Curing takes approximately 24 hours. Pets should be kept off during this time.
  5. Tape is removed.